| Preparing and priming | Tips | Paint types | Head4 |
|---|---|---|---|
| Exterior Paint - Proper Primers and Cleaning a MUST! Old House Wb : paint how to CornerHardware.com -no powerwash, primer, caulking, fill wood Mildew- The Paint Quality Institute THIS OLD HOUSE - A Fresh Coat of Paint (good) Ext paint - all surface preparation Hardboard prep : (latex primer?) |
No powerwash Filling rotten wood Preparing mildew areas Oil based primer Prep, Prime, Fill, Prime, Paint Topcoat on w/in 2 weeks of primer. |
Ext Paint types
which to use Alkyd / Oil ? vs latex Oil on Oil PaintQual Inst - oil vs latex MAB - 86th st store Colors
glidden |
|
| Existing paint test rub it with denatured alcohol. If the paint comes off, its latex. If it doesn't, its oil. |
|||
Brushes to use (based on paint)
Most paint jobs can be handled with a three-inch straight-edge siding brush, a two-inch angled sash brush, and a two-and-a-half-inch straight-edge trim brush. Good brushes of any size have long bristles with chiseled (tapered) ends and flagged (split) tips. The bristle depends on the paint: natural bristle (hog's hair is best) may absorb water from latex paints, ruining the brush, so they should be used only for oil. Nylon and polyester brushes do not release oil paint uniformly, so these should be used only for latex.
Lake Trim Painting
quart of green/gray paint
oil / alkyd primer and finnal coat
gray avail as primer? what will green cover better
also exterior painter's caulk (for gaps)
Never use pure silicone caulk it won't bond with paint.
wood filler ?? exterior patching compound
what is siding made of? Hardboard?
Is the new roof trim aluminum? (pre-primed?)
tool for removing caulk
caulk and gun
wire brush, plus scrapers, steel wool
more drop cloths (green tarp?)
bleach
respirator
sandpaper (100 grit)
belt sander.
razor blade/ holder
New Wood preparation
Window glazing / Caulk
> Hi all,
>
> Can someone tell me the difference between window glazing and
> caulk. Also between plumber's putty and caulk? Can I use caulk around
> window pane? caulk around shower tub spout?
>
> Thanks!
Glazing compound is designed to harden slowly without shrinking and to be
removeable
without damage to glass or wood. Caulk is designed to be adhesive and
flexible. Using
caulk for glazing makes for very difficult repairs. Plumber's putty is
intended to
remain flexible for a long term seal against water and also to be removeable
without
difficulty. Caulk once again makes for difficult repairs later. You
should use a
silicone based caulk for a shower spout, plumber's putty is better for setting
sink and
tub drains.
Dan Bolt, Des Moines